[PDF&VCE] Lead2pass Provides Latest Exam 300-208 Dumps VCE For Free Downloading (1-20)
2016 October Cisco Official New Released 300-208 Dumps in Lead2pass.com! 100% Free Download! 100% Pass Guaranteed! Lead2pass is ready to provide Cisco candidates with 300-208 exam dumps which can be very helpful for getting Cisco certification, which means that candidates can easily get access to the services of Cisco 300-208 exam dumps, which will assure them 100% passing success rate. With Lead2pass 300-208 exam dumps, it will be easy to pass your 300-208 exam at your first time.
Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-208.html 2 1 QUESTION 1
How frequently does the Profiled Endpoints dashlet refresh data? A. every 30 seconds
B. every 60 seconds
C. every 2 minutes
D. every 5 minutes Answer: B QUESTION 2
Which command in the My Devices Portal can restore a previously lost device to the network? A. Reset
B. Found
C. Reinstate
D. Request Answer: C QUESTION 3
What is the first step that occurs when provisioning a wired device in a BYOD scenario? A. The smart hub detects that the physically connected endpoint requires configuration and must use
MAB to authenticate.
B. The URL redirects to the Cisco ISE Guest Provisioning portal.
C. Cisco ISE authenticates the user and deploys the SPW package.
D. The device user attempts to access a network URL. Answer: A QUESTION 4
Which three features should be enabled as best practices for MAB? (Choose three.) A. MD5
B. IP source guard
C. DHCP snooping
D. storm control
E. DAI
F. URPF Answer: BCE QUESTION 5
When MAB is configured, how often are ports reauthenticated by default? A. every 60 seconds
B. every 90 seconds
C. every 120 seconds
D. never Answer: D QUESTION 6
What is a required step when you deploy dynamic VLAN and ACL assignments? A. Configure the VLAN assignment.
B. Configure the ACL assignment.
C. Configure Cisco IOS Software 802.1X authenticator authorization.
D. Configure the Cisco IOS Software switch for ACL assignment. Answer: C QUESTION 7
Which model does Cisco support in a RADIUS change of authorization implementation? A. push
B. pull
C. policy
D. security Answer: A QUESTION 8
You are finding that the 802.1X-configured ports are going into the error-disable state. Which command will show you the reason why the port is in the error-disable state, and which command will automatically be re-enabled after a specific amount of time? (Choose two.) A. show error-disable status
B. show error-disable recovery
C. show error-disable flap-status
D. error-disable recovery cause security-violation
E. error-disable recovery cause dot1x
F. error-disable recovery cause l2ptguard Answer: BD QUESTION 9
Which of these is a configurable Cisco IOS feature that triggers notifications if an attack attempts to exhaust critical router resources and if preventative controls have been bypassed or are not working correctly? A. Control Plane Protection
B. Management Plane Protection
C. CPU and memory thresholding
D. SNMPv3 Answer: C QUESTION 10
Which administrative role has permission to assign Security Group Access Control Lists? A. System Admin
B. Network Device Admin
C. Policy Admin
D. Identity Admin Answer: C QUESTION 11
Refer to the exhibit. If the given configuration is applied to the object-group vpnservers, during which time period are external users able to connect?
 A. From Friday at 6:00 p.m. until Monday at 8:00 a.m.
B. From Monday at 8:00 a.m. until Friday at 6:00 p.m.
C. From Friday at 6:01 p.m. until Monday at 8:01 a.m.
D. From Monday at 8:01 a.m. until Friday at 5:59 p.m. Answer: D QUESTION 12
Which set of commands allows IPX inbound on all interfaces? A. ASA1(config)# access-list IPX-Allow ethertype permit ipx
ASA1(config)# access-group IPX-Allow in interface global
B. ASA1(config)# access-list IPX-Allow ethertype permit ipx
ASA1(config)# access-group IPX-Allow in interface inside
C. ASA1(config)# access-list IPX-Allow ethertype permit ipx
ASA1(config)# access-group IPX-Allow in interface outside
D. ASA1(config)# access-list IPX-Allow ethertype permit ipx
ASA1(config)# access-group IPX-Allow out interface global Answer: A QUESTION 13
Which command enables static PAT for TCP port 25? A. nat (outside,inside) static 209.165.201.3 209.165.201.226 eq smtp
B. nat static 209.165.201.3 eq smtp
C. nat (inside,outside) static 209.165.201.3 service tcp smtp smtp
D. static (inside,outside) 209.165.201.3 209.165.201.226 netmask 255.255.255.255 Answer: C QUESTION 14
Which command is useful when troubleshooting AAA Authentication between a Cisco router and the AAA server? A. test aaa-server test cisco cisco123 all new-code
B. test aaa group7 tacacs+ auth cisco123 new-code
C. test aaa group tacacs+ cisco cisco123 new-code
D. test aaa-server tacacs+ group7 cisco cisco123 new-code Answer: C QUESTION 15
In a multi-node ISE deployment, backups are not working on the MnT node. Which ISE CLI option would help mitigate this issue? A. repository
B. ftp-url
C. application-bundle
D. collector Answer: A QUESTION 16
Which command can check a AAA server authentication for server group Group1, user cisco, and password cisco555 on a Cisco ASA device? A. ASA# test aaa-server authentication Group1 username cisco password cisco555
B. ASA# test aaa-server authentication group Group1 username cisco password cisco555
C. ASA# aaa-server authorization Group1 username cisco password cisco555
D. ASA# aaa-server authentication Group1 roger cisco555 Answer: A QUESTION 17
Which statement about system time and NTP server configuration with Cisco ISE is true? A. The system time and NTP server settings can be configured centrally on the Cisco ISE.
B. The system time can be configured centrally on the Cisco ISE, but NTP server settings must be configured
individually on each ISE node.
C. NTP server settings can be configured centrally on the Cisco ISE, but the system time must be configured
individually on each ISE node.
D. The system time and NTP server settings must be configured individually on each ISE node. Answer: D QUESTION 18
Wireless client supplicants attempting to authenticate to a wireless network are generating excessive log messages. Which three WLC authentication settings should be disabled? (Choose three.) A. RADIUS Server Timeout
B. RADIUS Aggressive-Failover
C. Idle Timer
D. Session Timeout
E. Client Exclusion
F. Roaming Answer: BCD QUESTION 19
Which two authentication stores are supported to design a wireless network using PEAP EAP- MSCHAPv2 as the authentication method? (Choose two.) A. Microsoft Active Directory
B. ACS
C. LDAP
D. RSA Secure-ID
E. Certificate Server Answer: AB QUESTION 20
What is another term for 802.11i wireless network security? A. 802.1x
B. WEP
C. TKIP
D. WPA
E. WPA2 Answer: E
Lead2pass are committed on providing you with the latest and most accurate 300-208 exam dumps. Our 300-208 dump is rich in variety. We offer 300-208 PDF dumps and 300-208 VCE dumps. We ensure you can pass the 300-208 easily. Welcome to Lead2pass.com.
300-208 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDM1I1WlhIdHJZNjA 2016 Cisco 300-208 exam dumps (All 250 Q&As) from Lead2pass: http://www.lead2pass.com/300-208.html 2 1 [100% Exam Pass Guaranteed]
|
