Easily Pass 70-410 Exam with the Help of Lead2pass New Microsoft 70-410 VCE and PDF Dumps (121-130)

Lead2pass 70-410 practice tests hold the key importance and provide a considerable gain for your knowledge base. You can rely on our products with unwavering confidence; Get the profound knowledge and become a pro with Lead2pass assistance.

QUESTION 121
You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the File and Storage Services server role installed.
You attach four 500-GB disks to Server1.
You need to configure the storage to meet the following requirements:
- Storage for an application named Application1 must be provided. Application1 requires 20 GB and will require a maximum of 800 GB in three years.
- Storage for an application named Application2 must be provided. Application2 requires 20 GB and will require a maximum of 900 GB in three years.
- The solution must provide the ability to dynamically add storage without requiring configuration changes to the applications.
- The storage must be available if a single disk fails.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A.    From File and Storage Services, create virtual disks by using fixed provisioning.
B.    From File and Storage Services, create a storage pool that uses all four disks.
C.    From Disk Management, create two new mirror volumes that use two disks each.
D.    From Disk Management, create a new RAID-5 volume that uses all four disks.
E.    From File and Storage Services, create virtual disks by using thin provisioning.

Answer: BE
Explanation:
Original answer is AB.
But the correct answer is B and E. it can't be A, because a fixed disk can't get expanding.

QUESTION 122
Your network contains multiple subnets.
On one of the subnets, you deploy a server named Server1 that runs Windows Server 2012 R2.
You install the DNS Server server role on Server1, and then you create a standard primary zone named contoso.com.
You need to ensure that client computers can resolve single-label names to IP addresses.
What should you do first?

A.    Create a reverse lookup zone.
B.    Convert the contoso.com zone to an Active Directory-integrated zone.
C.    Configure dynamic updates for contoso.com.
D.    Create a GlobalNames zone.

Answer: D
Explanation:
D. use GlobalNames zones in Windows Server 2008 to take advantage of single-label names Providing Single-Label DNS Name Resolution:
While Domain Name System (DNS) is the predominant name-resolution technology in TCP/IP networks, Windows Internet Name Service (WINS) is deployed in many networks as an alternative name-resolution protocol.
GlobalNames Zone (GNZ) feature: The GNZ feature is designed to enable DNS resolution of these single-label, static, global names. You can deploy a GNZ in a single forest or across multiple forests.
GNZ is intended to aid the retirement of WINS. It is not a replacement for WINS. GNZ is not intended to support the single-label name resolution of records that are registered dynamically and therefore not managed by IT administrators. GNZ does make it possible for you to provide single-label name resolution of a fixed set of host computers whose names are guaranteed to be both global and unique.
http://technet.microsoft.com/en-us/library/cc731744.aspx
http://technet.microsoft.com/en-us/library/cc816610(v=ws.10).aspx

QUESTION 123
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has six network adapters. Two of the network adapters are connected to a network named LAN1, two of the network adapters are connected to a network named LAN2, and two of the network adapters are connected to a network named LAN3.
You create a network adapter team named Team1 from the two adapters connected to LAN1.
You create a network adapter team named Team2 from the two adapters connected to LAN2.
A company policy states that all server IP addresses must be assigned by using a reserved address in DHCP.
You need to identify how many DHCP reservations you must create for Server1.
How many reservations should you identify?

A.    3
B.    4
C.    6
D.    8

Answer: B
Explanation:
2 Adapters = LAN1 = Team1 = 1 IP
2 Adapters = LAN2 = Team2 = 1 IP
2 Adapters = LAN3 = No Team = 2 IP
1 + 1 + 2 = 4

QUESTION 124
Your network contains an Active Directory domain named contoso.com.
All servers run Windows Server 2012 R2. The domain contains a server named Server1.
You open Review Options in the Active Directory Domain Services Configuration Wizard, and then you click View script.
You need to ensure that you can use the script to promote Server1 to a domain controller.
Which file extension should you use to save the script?

A.    .pal
B.    .bat
C.    .xml
D.    .cmd

Answer: A

QUESTION 125
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server!. Server1 runs a Server Core installation of Windows Server 2012 R2.
You install the DNS Server server role on Server1.
You need to perform the following configurations on Server1:
- Create an Active Directory-integrated zone named adatum.com.
- Send unresolved DNS client queries for other domain suffixes to the DNS server of your company's Internet Service Provider (ISP).
Which Windows PowerShell cmdlets should you use? To answer, drag the appropriate cmdlet to the correct configuration in the answer area. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Answer:

QUESTION 126
Your network contains an Active Directory domain named contoso.com. The network contains 500 client computers that run Windows 8.
All of the client computers connect to the Internet by using a web proxy.
You deploy a server named Server1 that runs Windows Server 2012 R2.
Server1 has the DNS Server server role installed.
You configure all of the client computers to use Server1 as their primary DNS server.
You need to prevent Server1 from attempting to resolve Internet host names for the client computers.
What should you do on Server1?

A.    Create a primary zone named ".".
B.    Configure the Security settings of the contoso.com zone.
C.    Create a zone delegation for GlobalNames.contoso.com.
D.    Create a stub zone named "root".

Answer: A

QUESTION 127
Your network contains an Active Directory domain named contoso.com.
The domain contains 100 user accounts that reside in an organizational unit (OU) named 0U1.
You need to ensure that a user named User1 can link and unlink Group Policy objects (GPOs) to OU1. The solution must minimize the number of permissions assigned to User1.
What should you do?

A.    Modify the permissions on OU1.
B.    Run the Set-GPPermission cmdlet.
C.    Add User1 to the Group Policy Creator Owners group.
D.    Modify the permissions on the User1 account.

Answer: A

QUESTION 128
You have a server that runs Windows Server 2012 R2.
The server contains the disks configured as shown in the following table.

You need to create a volume that can store up to 3 TB of user files.
The solution must ensure that the user files are available if one of the disks in the volume fails.
What should you create?

A.    a mirrored volume on Disk 1 and Disk 4
B.    a mirrored volume on Disk 2 and Disk 3
C.    a RAID-5 volume on Disk 1, Disk 2, and Disk 3
D.    a spanned volume on Disk 0 and Disk 4

Answer: B

QUESTION 129
What should you do for server core so it can be managed from another server 2012 R2?

A.    1
B.    2
C.    3
D.    4
E.     5
F.     6
G.    7
H.    8
I.      9
J.    10
K.   11
L.   12
M.   13
N.    14
O.    15

Answer: H
Explanation:
4) Configure Remote Management is already "Enabled". 8)
Network Settings
You can configure the IP address to be assigned automatically by a DHCP Server or you can assign a static IP address manually. This option allows you to configure DNS Server settings for the server as well.
http://technet.microsoft.com/en-us/library/jj647766.aspx

QUESTION 130
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1.
Server1 runs Windows Server 2012 R2. On Server1, you create a printer named Printer1.
You share Printer1 and publish Printer1 in Active Directory.
You need to provide a group named Group1 with the ability to manage Printer1.
What should you do?

A.    From Print Management, configure the Sharing settings of Printer1.
B.    From Active Directory Users and Computers, configure the Security settings of Server1-Printer1.
C.    From Print Management, configure the Security settings of Printer1.
D.    From Print Management, configure the Advanced settings of Printer1.

Answer: C

Lead2pass Microsoft 70-410 exam pack will raise your capability to understand exam basics and fundamentals in a more organized and flexible way. Once you have prepared effectively through Microsoft 70-410 exam pack you can predict about exam difficulty level, accordingly you can take several measures to cope with such difficulties and pass your exam easily.

http://www.lead2pass.com/70-410.html